BAOHENG | AS/RS PLASTIC PALLET INSPECTION RECORD
Template revision: 2026-10-30
Guide: https://www.baohengasrs.com/resources/insights/asrs-plastic-pallet-inspection-checklist/

Use one record per identifiable pallet or issue. Mark unknowns TO CONFIRM.
This record does not define acceptance limits or authorise return to service.

1. IDENTIFICATION
Record ID:
Inspection date / inspector:
Pallet asset ID / batch:
Manufacturer / family / model:
Drawing and configuration revision:
Identification photograph:

2. OPERATING CONTEXT
Station / route / travel and pickup orientation:
Payload and total unit mass / loading pattern:
Support arrangement / span:
Operating temperature:
Incident or exposure history / date:

3. CONDITION - record observations; NOT INSPECTED where inaccessible
Deck and corners / photo references:
Runners and underside / photo references:
Fork and pickup openings / photo references:
Surface / contamination / cavities / debris:
Permanent change in shape or suspected material deterioration:
Equipment contact surfaces / guides / stops / detection features:
Associated transfer fault / station / timestamp:

4. REVIEW BASIS
Manufacturer criteria / document and revision:
System provider criteria / document and revision:
Measurement location / method / condition / result:
Unresolved questions:

5. HOLD AND FOLLOW-UP
Status: HOLD / RELEASED / RETIRED
Hold identification and physical location:
Method preventing unintended reuse:
Assigned reviewer / next action:
Target review date:

6. DISPOSITION
Review result and supporting evidence:
Approved repair method, if applicable / responsible organisation:
Required reinspection or compatibility validation / results:
Final disposition / date / approver:
Replacement enquiry reference or disposal arrangement:

Inspect only under the site's safe handling and machinery isolation procedures.
Unresolved conditions remain on hold. Follow applicable manufacturer and system instructions.